13
2. Operation Days:
Use the
to set a particular day as an operation day, the cursor
will advance to the next day. In our example set Monday and
Friday for operation.
Press the
button to move to the next programming screen
which is the Start Times screen.
3. Start Time:
Use the
and the
buttons to set the required Start Time
(08:00 in our example).
The controller is now set for automatically operating this Dead
end Pipes Purging Application.
B. Purging interval by Days Interval and purging amount
by operation time:
In this example the pipe needs to be purged for 5 minutes every
10 days at 08:00 AM. Therefore the three required program
parameters of the controller are: Operation Time - 5 Minutes,
Operation Interval - 10 days, and Start Time at 08:00 AM.
1. Operation Time:
Use the
button to move to the Operation Time programming
screen - this is the screen with blinking
con, blinking triangle
with the digit 1 in it and the
icon. Use the
and the
buttons to set the required operation time (00:05 minutes in
our example).
Press the
button to move to the next programming screen
which is the Operation Days screen.