9
Second Basic Settings Screen
In the second setting screen the operator can set the Flow Switch
usage mode. Please note that a flow switch can be used only for
BERMAD’s pressure management application.
Flow switch mode:
Press the
button to enable or disable the flow switch
operation. When a flow switch is enabled the
icon appears
on screen. Factory default - flow switch enabled.
Press the
button to move to the next basic settings screen.
Third Basic Settings Screen
The third setting screen is used for setting the system time and
day of the week.
System Time:
Use the
and the
buttons to set the system time.
Hold the button pressed to quickly advance the digits.
Press both buttons simultaneously to reset the time and day
to the factory default setting.
Day of the week:
Use the
button to scroll through days of the week and set
the current day.
Press the
button to exit the basic settings screens and move
to the operation programming screens.
Total Reset Operation
In order to return the controller to its factory defaults setting,
erasing the memory, and restarting the controller operation,
press the
button for at least 6 seconds.
