GENERAL
INTRODUCTION
This manual is for the Berkel X13 Slicer. Procedures
in this manual will apply to all models unless specified.
Pictures and illustrations will be of model X13A unless
otherwise noted.
All of the information, illustrations and specifications
contained in this manual are based on the latest
product information available at the time of printing.
Models
X13
Manual slicer with
interlocks
X13A
Automatic slicer with
interlocks
X13E
Manual slicer without
interlocks
X13AE
Automatic slicer without
interlocks
OPERATION
Refer to the Instruction Manual for specific operating
instructions.
CLEANING
Refer to the Instruction Manual for specific cleaning
instructions.
SPECIFICATIONS
Slicer Dimensions
Width: 26-3/4"
Length: 30-1/2"
Height: 25-1/4"
Electrical
115/60/1 (5.5 amps)
Knife Motor
1/2 H.P.
Thickness
Adjustable to slice a thickness up to 1-5/16".
Slicing Speed (Automatic)
Low: 20 slices per minute
Medium: 40 slices per minute
High: 60 slices per minute
Stroke Length (Automatic)
Low: 5 in.
Medium: 9 in.
High: 13 in.
Slicing Capacity
Square: 7-1/2" x 7-1/2"
Round: 8-1/2"
Rectangle: 10-1/2" x 6-3/4"
Knife Dimension
13"(new) to 12-3/4"(min.)
Net Weight
Manual 88 lbs., Automatic 98 lbs.
Shipping Weight
Manual 118 lbs., Automatic 128 lbs.
LUBRICATION
Lubricants
Where Used
Berkel Oil, Part No.
01-404675-00182
In wick for round rail.
Lightly coat-pusher arm
guide rail, o-rings in knife
hub assembly.
TOOLS
Standard
•
Standard set of hand tools.
•
Metric set of hand tools.
•
VOM with A.C. current tester (Any quality VOM
with a sensitivity of at least 20,000 ohms per volt
can be used).
Special
•
Loctite® Primer, Part No. 00-544434-2
•
Loctite® 242™, Part No. 00-520228
•
RTV 732, Part No. 00-513886-3
•
Field Service Grounding Kit (available locally)
•
Torque Wrench (in.-lbs.)
X13 SLICER - GENERAL
Page 5 of 36
F25332 Rev. A (0718)
