Bergstrom NITE Phoenix T2000, Installation Manual

Page: 67 / 72

67
5-2
Changing TEMPERATURE set point,
Anytime the temperature set point is displayed on the
screen, push the up or down arrows to change.
Temperature range is from 60 °F (coolest) to 85 °F
(warmest).
NOTE: Control will retain the last Mode and Blower
settings but the Temperature will always default back
to 72 °F degrees on restarts.
To view system runtime/hours
– press ENTER until
“Hrs” show on display. When hours are displayed,
pressing ENTER for 7 seconds will reset the hours to
zero.
To change from °F to °C press ENTER until
temperature symbol only shows
– push the up or down
arrow to change. After 5 seconds selection will be
locked.
Anytime the control is idle for 5 seconds the screen will
return to the temperature set point screen.
Adjusting
Temperatur
e
Enter
Enter
Operating Instructions