10
ASSEMBLY
There are seven different positions on the adjustment
tube (item 1) (the adjustment tube can be inverted) to
adjust the length of the subframe.
To choose the right adjustment, insert the adjustment
tube into the subframe (item 2) and insert the rear
bracket (item 3) on the adjustment tube. Slide the
hitch support (item 4) on the rear bracket. Do not
secure.
Assembling the subframe
Drive the vehicle over the subframe, make sure the
caster wheels do not touch the front wheels of the
vehicle.
Identify the right length of the subframe (item 1) and
secure in place with two long pins (item 2), a short pin
(item 3) and three hair pins 3mm (item 4).
Securing the subframe
Among the three following configurations, choose
the height of the hitch support. There must be a
maximum of ground clearance.
(Configuration A) does not have the hitch support
plates (item 1).
If applicable, assemble the hitch support plates on
the hitch support (item 2) with four hex bolts 3/8" x
3/4" (item 3) and four nylon insert lock nuts 3/8".
Secure the hitch (item 4) on the two hitch support
plates or on the hitch support with a hex bolt 3/8" x
3
" (item 5)
and one nylon insert lock nut 3/8".
Tighten firmly
Adjusting the hitch support
