7
ASSEMBLY
STEP 2
ROTARY BROOM PREPARATION:
STEP 1
VEHICLE PREPARATION:
NOTE: A 1 7/8” or 50 mm tow hitch ball is required.
A) Install the lift strap (item 1) by looping it around the
suspension arm (as shown) on the vehicle.
Tighten the loop firmly.
# Item
Description
Action
B) Install the brackets (item 3) on both sides of
vehicle.
Bolt and nut from
suspension arm
Remove.
2-3
Flat washer and
bracket
Install and lightly
secure with the
original bolt and nut.
C) Install the brackets (item 4) on both sides of
vehicle.
Nut from
suspension arm
Remove.
4
Bracket
Install and lightly
secure with the
original nut.
Choose among the three different options to prepare
your vehicle (A, B, C).
Install the lift strap or the brackets.
Install parking stands
Install a parking stand on each side of broom.
# Item
Description
Action
1
Parking stand
(qty 2)
Insert in stand holder.
2
Cotter pin 5/32 x 1’’
(qty 2)
Secure in top hole as
shown.
3
Hair pin 2.5mm
(Qty 2)
Secure in bottom
hole as shown.
This will allow the broom to rest on the parking
stands.
