11
ASSEMBLY
Install the assembled hitch support (item1) on the
vehicle’s tow hitch ball.
# Item
Description
Action
1
Assembled hitch
support
Insert
onto
the
adjustment tube.
2-3
Pin and 3mm hair
pin
Secure in place.
NOTE: The hitch support has two sets of holes to
increase the length of the subframe if necessary.
1
Assembled hitch
support
A tt a c h
o n
t h e
vehicle’s tow hitch
ball.
4-5
Pin and 3mm hair
pin
Secure.
Make sure the subframe does not come into contact
with vehicle at any time.
NOTE: You can turn the hitch assembly (item 1) by
removing the pin (item 2) to facilitate driving the
vehicle over the subframe.
WARNING : Always check that ball is completely
inserted into hitch coupler socket and that the
underjaw is securely closed around the bottom of ball.
Always check tightness before using the tow hitch. If
necessary, tighten locknut against tension spring.
Be sure hitch coupler handle is in locked position.
Secure the hitch support on the tow hitch ball
Install the turnbuckles (item 1) into the brackets or
into the lift straps.
# Item
Description
Action
1
Turnbuckle
(qty 2)
Adjust them so that the
subframe is centered
under the vehicle.*
*Tighten the turnbuckles firmly in order to tighten the
vehicle's suspension.
IMPORTANT: After adjusting the turnbuckles, tighten
the nuts on the vehicle’s suspension arms firmly.
Make sure to lock the nuts with the original locks.
Install the turnbuckles