10
ASSEMBLY
Choose between the three positions (see figure), the
height of the hitch support.
There must be a maximum of ground clearance
according to your vehicle.
Figure A does not have the hitch support (item 1).
Assemble the hitch supports (item 1) and the hitch
(item 3).
# Item
Description
Action
1
Hitch support
(qty 2)
Install the supports on
the hitch support.
2
Hex bolt
3/8’’ x 3/4’’
(qty 4)
Insert in chosen holes
(two on each side) and
secure with the flange
nuts 3/8’’.
Tighten firmly.
3
Hitch
Insert on the two hitch
supports (if applicable).
4
Hex bolt
3/8’’ x 3’’
Insert in hole as shown
and secure with nylon
insert lock nut 3/8’’.
Assemble the hitch support
You have seven different positions on the adjustment
tube (item 1) (the the adjustment tube can be
inverted) to adjust the length of the subframe.
To choose the right adjustment, insert the adjustment
tube (item 1) into the subframe (item 2) and insert the
hitch support (item 3) on the adjustment tube. Do not
secure.
Turn the hitch support to the side to facilitate
installation.
Drive the vehicle over the subframe, make sure the
caster wheels do not touch the front wheels of the
vehicle.
Identify the right length and secure in place with a pin
(item 4) and 3mm hair pin (item 5).
IMPORTANT: Make sure the adjustment tube is
inserted to its maximum in the subframe in order to
prevent premature damage to the subfame.
Adjust length of subframe
