12
Attach the vehicle’s winch’s hook on the bracket.
# Item
Description
Action
If the vehicle's winch is
higher than 20" (510mm) from the ground.
1
Sleeve
Install in the top hole
of the lever.
If the vehicle's winch is
lower than 20" (510mm) from the ground.
1
Sleeve
Install in the bottom
hole of the lever.
2
Hex bolt 1/2" x 2
1/4" and nylon
insert lock nut
Tigten firmly.
Vehicle’s winch’s
hook
Install on bracket as
shown.
Tip: Thread the winch’s hook behind the lever as
shown and then thread the cable over the sleeve.
ASSEMBLY
Install the winch hook
STEP 4
INSTALLATION OF THE CONTROL BOX
As shown, choose from the three different ways to
secure the control box support (item 1).
Use two hex bolts 1/4” x 1 1/2” (item 2), the support
brackets (item 4), spacers (item 3) and the flange
nuts.
Insert the control box (item 5) into the support.
Install the control box