8
ASSEMBLY
CAUTION
Never use the Rotary Broom without the belt
guard.
DANGER
NEVER OPERATE THE ROTARY BROOM
WITHOUT:
Brush hood
Belt guard
Gear box guard
Extension guard and any other safety protection
devices in place.
Install the push frame
Install the link
Install the push frame (item 1).
# Item
Description
Action
1
Push frame
Insert under the
motor frame.
2
Cone bearing
(qty 2)
Insert as shown.
3
Seal washer
Secure with hollow
portion towards the
top.
Tighten loosely enough to permit the push frame to
move freely.
Fill the space between the bearings with grease.
4
Nylon insert lock nut
Secure from the
bottom as shown.
Install the link (item 3)
# Item
Description
Action
1
Hex bolt
1/4 X 1’’ (qty 2)
Insert under the lever
as shown.
2
Flat washer
(qty 2)
Install on lever as
shown.
3
Link
Install one end of link
on the bolt as shown.
Tighten loosely enough to permit the parts to move
freely.
Install the other end of the link on the pivot following
the same steps as shown.
4
Nylon insert lock nut
(qty 2)
Secure link as
shown.