Berbel BKF 90 iPP, Operating And Installation Instructions

Page: 154 / 164

154
Operation
6006113_a – 01.06.2022
4.7.9 Filter filling indicator
The device has a check indicator in order to remind the
operator to change the filter filling. If no recirculated air filter
is used, the control indicator does not have any meaning.
The function is set so that the button flashes every 1,000 fan
operating hours (flash duration 120 seconds) as soon as the
extractor hood is turned off. The hours counter is restarted by
switching off the control indicator.
Button flashes:
The filter filling must be replaced.
Observe the extractor hood instructions.
☞ Press the slider at the position below the
symbol (> 1 second) to restart the hours
counter.
4.7.10 Window contact switch
If a window contact switch is connected to the extractor
hood, this monitors whether the corresponding window is
open or closed. Extraction only takes place with an open
window or in recirculated air mode.
Button flashes:
y
A window contact switch is connected to
the extractor hood.
y
The window is closed.
y
The extractor hood does not perform
extraction.
☞
Open the window.
y
Extraction can be used.
4.7.11 AutoRun
Extractor hoods equipped with the AutoRun module start
automatically when the hob is turned on. When the hob is
switched off, the fan switches to the run-on function and
then switches off.
The AutoRun automation is set in the extractor hood
configuration mode.
Observe the extractor hood instructions.