Berbel BKF 90 iPP, Operating And Installation Instructions

Page: 150 / 164

150
Operation
6006113_a – 01.06.2022
4.5.10 “Pot speed test” function
Available in menu level 3 on cooking zone 4 and if no
cooking zone is active (all power levels = 0).
Function for determining whether the cookware is suitable
for use with the induction hob.
The effectiveness and cooking speed of the cookware are
measured with this function.
This function can only be executed if all cooking zones are
available and set to power level 0.
This function can only be executed on cooking zone 4.
☞ Press the slider at the position below the
symbol for 3 seconds.
y
The symbol illuminates.
The 7-segment display on cooking zone 3
shows that it is ready for testing. The other
cooking zones must not be used.
☞ Place the cookware on cooking zone 4 to
perform the test.
y
The 7-segment display flashes.
☞
Touch any position on the slider of
cooking zone 4.
y
The test runs.
The test result is displayed for 3 seconds.
Display of the speed on the 3x 7-segment display:
Low speed level.
The cookware is not recommended for the
induction hob.
Medium speed level.
The cookware is suitable for the induction
hob.
High speed level.
The cookware is optimal for the induction
hob.
If this display appears, the cookware is not
suitable for the induction hob.
Display of the speed on the 7-segment display of cooking
zone 4:
Low speed level.
The cookware is not recommended for the
induction hob.
Medium speed level.
The cookware is suitable for the induction
hob.
High speed level.
The cookware is optimal for the induction
hob.