9
Assembling your monitor hardware
3. Assembling your monitor hardware
Setting up the cable connection
If the computer is turned on, you must turn it off before continuing. Do not plug-in or turn-on
the power to the monitor until instructed to do so.
1. Unpack the monitor and place the monitor on the
desk as illustrated.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or
a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping the
monitor around on your desk will scratch or damage the
monitor surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
2. Adjust the angle and height of the monitor.
Lift the screen upward and then pull the screen forward
until it reaches your desired angle and height.
For more information about the adjustment of the view-
ing angle, refer to "
Adjusting the display angle on page
13
".
The maximum tilt angle of the monitor is -5 to +20
degrees. If you tilt the monitor over 20 degrees, the
monitor will lose its balance.
While angling the screen, watch the space between the
monitor and the stand plate to avoid any possible injury
with your fingers.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
