33
Adjusting your monitor
You can also launch
Calibrate
via
Visual Optimizer
and the
Calibrate
command under the
LUMINANCE
on-screen menu.
Calibrate
To regularly automate the luminance
compensation, you may activate the
Calibration Reminder
command under
LUMINANCE
, so that when the usage
time of your monitor is up to 50 hours, you
will be ask to perform the calibration. See
Calibration Reminder on page 38
.
With the sensor on the back of the handheld monitor
controller, Calibrate ensures you the accurate display
measurement.
•
Press Calibrate to bring out the following
message.
•
Place the sensor as the on-screen instructions
state.
Put the attached suction cap on the upper panel of
the display to balance the weight of the controller.
The calibration takes around 10 to 15 seconds. When
done, the following message will display:
The
Calibration Completed!
message will be
displayed in English.
