15
111660 Rev C 5-13-14
How to Read Electro-Mechanical Totals
Menu Code 2
This menu code allows the operator or manager to read the electro-mechanical totals. If the Manager
did not enter a different value in Menu Code 5, this total should be the same as the electro-mechanical
totalizers.
To read the non-blender meter totals, follow this procedure:
1. Press the 2 button and then the
MODE
button on the
keypad. The main display appears similar to Figure T-7.
The main display shows the electro-mechanical total.
The total number is carried to three decimal places. The
price display reads P 1.2 for Product 1 Electro-
Mechanical Totalizer, Menu Code 2.
2. To read the totals for the remaining meters, press
ENTER
.
NOTE: See page 13 for instructions for reading Menu
Code 2 totals with the Magnetic Reed Switch.
If the dispenser is a blender, follow this procedure:
1. Press the 2 button and then the
MODE
button on the
keypad. The main sales display appears similar to
Figure T-8.
NOTE: The number displayed is a grand electro-
mechanical total for Product 1. Grand electro-
mechanical total = Product 1 from Hose A and
blended Product 1 from Hose B. The grades are
numbered starting with one.
2. Press the
ENTER
button to see the grand electro-
mechanical total for Product 3. Pressing the
ENTER
button again displays the grand electro-mechanical total
for Product 1 again.
3. To read the electro-mechanical totals for the hoses,
press the
ENTER
key.
NOTE: If you are viewing the Electro-Mechanical Total
for a Non-Blender, the PPV Display will show a
“P1” (without a 0 preceding the product number). If
you are viewing the Electro-Mechanical Total for a
Blender, the PPV Display will show a “P01” (with a 0
preceding the product number).
056
789012
Figure T-7
Menu 2
P1 =
Product 1 Meter Totals
P1.2
Figure T-8
067
890123
P01.2
- - 1
- - 1 = Side 1
How to Operate the Dispenser
