4 - 7
FRONT WHEEL AND BRAKE DISCS
REMOVAL/INSTALLATION OF BRAKE DISCS
1
2
6
3
4
5
A
Remove:
•
front wheel, refer to chapter
“Removal of the front wheel”
•
brake callipers, refer to chapter
“Removal of the front
brake callipers”
• screws
(12*)
•
brake disc (2*)
Install:
•
left front brake disc (2*)
•
and screws (12*)
NOTE:_________________________________
Repeat the above-mentioned procedure for the opposite
front disc brake.
AREXON SYSTEM 52A43
MEDIUM GRADE BRAKE
THREAD SEALANT
The procedure below applies to both brake discs.
NOTE:_________________________________
Tighten the bolts of the brake disc in successive passes, op-
erating in a criss-cross sequence - Fig. A.
•
Tighten the torque:
T.R.
Torque 22N*m
NOTE:_________________________________
The numbers marked (*) are a part of the table at the begin-
ning of the chapter.
COPY - Moto GB - Grant Martland - [email protected]
Summary of Contents for TRK 502
