Benelli TRK 502, Service Station Manual

Page: 382 / 408

ELE. - 38
DEVICES
LEFT ELECTRIC DEVICE
It is situated on the left side of the handlebar Fig. 7. The left
electric device consists of:
•
Light switch control (A)
for switching-over the high/low beam.
•
Indicator lights control (B)
by moving the control to the right or to the left, the relevant indi-
cator lights are activated.
The returns to the centre. Press to deactivate the indicator lights.
•
Horn switch button (C)
press to activate the horn.
•
High beam flash button (D)
It is used to signal the presence in conditions of poor visibility.
Check:
• The continuity using the multitester positioned on the rele-
vant terminals with the button pressed.
Check:
• The continuity
by positioning the multitester on the relevant terminals with the
button pressed.
Check:
• The continuity
using the multitester positioned on the relevant terminals accord-
ing to selection (left/right).
Check:
• The continuity
using the multitester positioned on the relevant terminals accord-
ing to selection (how/low beam).
A
7
Refer to the table.
WIRE COLOURING Red/Yel Light Blue Blue Red/Whi Gre/Bla Oran Gre/Whi
Red/
Wh
Bro
Right indicator light
• •
Left indicator light
• •
High beam
• •
Low
Beam
• •
High beam flash
button
• •
Horn
• •
When the above conditions are fulfilled, the horn, the light switching control, the high beam flash button are operat
-
ing properly, otherwise replace the parts.
B
C
D
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk