RBJ Series of Rolling Jacks
20
P/N 5900004 — Rev. D1 — October 2020
Raising and Lowering
This section describes how to raise and lower your Rolling Bridge Jack.
To raise a Vehicle
:
1.
Drive the Vehicle onto the Lift.
⚠
WARNING
Make sure the Jack is fully lowered and the Pads are removed; you do not want
them to hit the underside of the Vehicle as it is driven onto the Lift. If a Vehicle does
ever hit any part of the Rolling Bridge Jack while being driven onto or off of the Lift,
make sure the Rolling Bridge Jack has not been damaged and that all Channel
Rollers are correctly seated in the Utility Rail Channel.
2.
Position the tires of the Vehicle in the center of each Runway.
3.
Set the parking brake on the Vehicle and use a wheel chock to hold the Vehicle in position.
4.
Check the Utility Rail Channels to make sure nothing is in them that could obstruct the movement
of the Rolling Bridge Jack.
5.
Check the area to make sure everyone is clear of the Lift and the Rolling Bridge Jack; make sure
there are no obstructions above the Vehicle.
6.
Position the Adjustable Arms of the Rolling Bridge Jack so the Pads are under the Vehicle’s axles
or lifting points.
⚠
WARNING
Make sure to lift the Vehicle on the axles or on the correct lifting points. Lifting at the
wrong location could potentially damage the Vehicle and/or the Rolling Bridge Jack.
Summary of Contents for RBJ15000
