![background image](http://html1.mh-extra.com/html/oemtools/24842/24842_operating-instructions-and-parts-manual_3401611001.webp)
UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed, a
shipping damage claim must be filed with carrier. DO NOT
use the OEMTOOLS™ 24842 1 Ton 2-Stage Telescoping
Transmission Jack if broken, bent, cracked or damaged
parts (including labels) are noted. Any Transmission Jack
that appears damaged in any way, operates abnormally or is
missing parts should be removed from service immediately.
If you suspect that the Transmission Jack was subjected to a
shock load (a load that was dropped suddenly, unexpectedly,
etc.), immediately discontinue use until it has been checked
by a factory authorized service center.
Open the Air Vent Valve on the side of the Jack Cylinder by
turning 2 full turns counterclockwise before using.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
The following safety information is provided as a guideline to help you operate your Transmission Jack under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are
not known or not followed. The following safety instructions are to provide the user with the information necessary for safe use
and operation. Please read and retain these instructions for the continued safe use of your Transmission Jack. Failure to follow
instructions listed below may result in serious injury. In addition, make sure that anyone who uses the equipment understands
and follows these safety instructions as well.
Operating Instructions and Parts Manual
24842
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
Thank you very much for choosing an OEMTOOLS
™
Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS
™
cannot be responsible for issues
arising from modification. We strongly recommend that this product is not modified and/or used for any application other than that
for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
Explanation of Safety Signal Words
WARNING
:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION
:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES
:
Provide clarity and helpful information.
1 TON 2-STAGE TELESCOPING
TRANSMISSION JACK
1
4/19
2019 OEMTOOLS
™
WARNING
24842