![background image](http://html.mh-extra.com/html/sealey/3000le-series/3000le-series_quick-start-manual_1225215001.webp)
3TONNE LOW ENTRY TROLLEY JACK WITH
ROCKET LIFT
MODEL NO:
3000LE SERIES
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9
Ensure the jack is in sound condition and good working order. Take action for immediate repair or
replacement of damaged parts. Use recommended parts only. The use of improper parts may be
dangerous and will invalidate the warranty.
9
Locate the jack in an adequate, well lit working area for its function.
9
Keep working area clean and tidy and free from unrelated materials.
9
Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
9
Place wedges under wheels of vehicle (but ensure wheels of jack can move freely ).
9
Ensure the vehicle handbrake is engaged (or in “PARKED” mode), and switch the engine off.
9
Ensure minimum distance of 0.5m between vehicle tilt & static objects such as doors, walls, etc.
9
Ensure all non essential persons keep a safe distance whilst the jack is in use.
9
Ensure there are no passengers in the vehicle to be jacked up.
9
Place jack under vehicle manufacturer’s recommended lifting points (see vehicle hand book).
9
Check that the lifting point is stable and centred on the jack saddle.
9
Ensure the jack wheels are free to move and that there are no obstructions.
WARNING:
The jack is a lifting device only.
9
To support the load always use axle stands (available from your Sealey stockist).
9
Ensure there are no persons or obstruction beneath the vehicle before lowering.
9
Use a qualified person to lubricate and maintain the jack.
9
Use only hydraulic jack oil.
9
When not in use store jack in a safe, dry, child proof area in the lowered position.
8
DO NOT
jack vehicle which may result in spillage of fuel, battery acid, or dangerous substances.
8
DO NOT
work under the vehicle until axle stands have been correctly positioned.
8
DO NOT
operate the jack if damaged.
8
DO NOT
exceed the rated capacity of the jack.
8
DO NOT
use the jack for purposes other than which it is intended.
8
DO NOT
top up the hydraulic unit with brake fluid. Use hydraulic oil only.
8
DO NOT
allow untrained persons to operate the jack.
8
DO NOT
allow the vehicle to move whist lifting or lowering.
8
DO NOT
use the jack to move vehicle.
8
DO NOT
adjust the safety overload valve.
2. INTRODUCTION
Twin piston Rocket Lift feature brings saddle to maximum height in minimal strokes. Universal joint release
mechanism allows safer, more controlled lowering of jack. Profiled lifting arm gives low clearance height of just
85mm making it suitable for sports and custom cars. Heavy-duty steel chassis provides stability and endurance.
Fitted with an overload valve for added safety. Hydraulic oil bypass system protects ram from being overextended.
3. SPECIFICATION
MODEL NO: ............................................................. 3000LE
Capacity: ..................................................................... 3tonne
Consumable Parts: ....Replacement Rubber Jack Pad - JP17
Length: ....................................................................... 702mm
Maximum Chassis Height: ......................................... 153mm
Maximum Saddle Height: ........................................... 500mm
Minimum Saddle Height: .............................................. 85mm
4. ASSEMBLY
4.1.
Push top section of handle into bottom section. Rotate until push button locates into hole in top section, to secure.
4.2.
Loosen location bolt at the side of the handle base. Insert jack handle and tighten the bolt.
3000LE Series Issue 1 30/04/2021
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear safety
footwear
1 3 5
2 4 R
TJL3
Chock
wheels
Never
exceed
jack capacity
Close
Raise
Lower
Lift & twist
to lower
OR
Use on a hard level floor
Apply
handbrake
w w w. s e a l e y. c o . u k
Use suitable axle stands
X2
Raise