ASSEMBLY MANUAL
VersiJack® C & VersiJack® CF
STEP 1:
Check the following jobsite conditions before starting your project.
H = Height
from roof surface to paver surface
Note: This is the desired finished height.
T = Thickness of Paver
S =
Need for
Slope Correction
(0-10% slope)
X = Calculated Pedestal Height
Note: Conditions often vary within the same project zone, so
Step 1 should be carried out thoroughly.
STEP 2:
Use measurements from Step 1 to select your pedestal size: (H - T = X).
If
not using slope correction
, use H
– T = X to identify
Pedestal Height
required. Then turn to
Appendix B
and use the
Pedestal Sizing Chart to select your pedestal for this location on the roof.
Example: Lloyd has H of 5” and T of 2.25”. Using H – T = X, Lloyd calculates 5” – 2.25” = 2.75”. So the correct
pedestal selection is CF2.
If
using slope correction
, please contact a sales rep for assistance in calculating your
Pedestal Height.
STEP 3:
Become Familiar With The Basic Pedestal Components.
Component
Function
1
Shim
Reduces or eliminates rocking of paver and reduces vibration/shifting
of paver. Available in 1mm or 2mm. Optional add-on.
2
Top Slope Corrector
Compensates for roof slope (up to 5% or more). Optional add-on. This
component adds approx 1/4” of height to the pedestal (varies with %
slope).
3
Pedestal Top
Provides the adjustable vertical rise.
4
Locking Ring
Minimizes movement after final pedestal adjustment.
5
X-245E Extender
Added to CF4 or CF5 to achieve pedestal heights over 11”. Optional
add-on.
6
Pedestal Base
Provides stability.
7
Base Extender
Added to any
CF pedestal to add 3/8” height. Optional add-on.
8
Pedestal Base Pad
Protects roof membrane and reduces vibration.
1
2
3
4
5
8
7
6
