BendPak HD-7500 Series, Installation And Operation Manual

Page: 9 / 84

HD-7500 Series Four-Post Lifts
9
P/N 5900174 — Rev. C — March 2021
Model HD-7500BL HD-7500BLX HD-7500PBX
Lifting capacity
7,500 lbs / 3,402 kg
Maximum capacity front axle
3,750 lbs / 1,701 kg
Maximum capacity rear axle
3,750 lbs / 1,701 kg
a
Minimum Runway Height
5" / 125 mm
b
Maximum Rise
70" / 1,778 mm 82"/ 2,058 mm 139" / 3,531 mm
c
Maximum Lifting Height
75" / 1,903 mm 87"/ 2,208 mm 145" / 3,681 mm
d
Overall Width
133.75" / 3,398 mm
132" / 3,357 mm
e
Outside Length
174" / 4,418 mm 198" / 5,028 mm
f
Overall Length
200.5" / 5,093 mm 224.5" / 5,704 mm
g
Height of Post
88" / 2,232 mm 100"/ 2,537 mm 158" / 4,010 mm
h
Distance Between Posts
122" / 3,103 mm
i
Drive-Through Clearance
108.5" / 2,756 mm
j
Runway Width
19" / 482 mm
k
Runway length
164.5" / 4,178 mm 188.5" / 4,788 mm
l
Width Between Runways
48" – 68" / 1,219 mm
–
1,727 mm
m
Runway Centerline
68.5" (narrow) or 88.5" (wide) / 1,740 mm or 2,248 mm
n
Outside Edge of Runways
87.5" (narrow) or 107.5" (wide) / 2,223 mm or 2,731 mm
Min. Wheelbase @ rated capacity
1 115" / 2,921 mm 135" / 3,429 mm
Min. Wheelbase @ 75% capacity
1 100" / 2,540 mm 115" / 2,921 mm
Min. Wheelbase @ 50% capacity 1
85" / 2,159 mm 95" / 2,413 mm
Min. Wheelbase @ 25% capacity
1 70" / 1,778 mm 80" / 2,032 mm
Locking Positions
14
spaced every 4" / 102
mm
17
spaced every 4" /
102 mm
31
spaced every 4" / 102
mm
Lifting time ~45 seconds ~50 seconds ~55 seconds
Motor
208-230 VAC, 60 Hz, 1 Ph
Air supply 3 to 25 cfm at 50 to 150 psi
1
The Lift supports less weight than its rated capacity when the Vehicle’s wheelbase is shorter; this is
because the wheels are closer to the middle of the Runways, where there is less strength. For example,
the maximum weight allowed on the Lift for a Vehicle with a wheelbase of 95" is 50 percent of the Lift’s
rated capacity (or 3,750 lbs when the rated capacity is 7,500 lbs).
Specifications subject to change without notice.