BendPak BB 1302-BA, Operation And Service Manual

Page: 4 / 72

4 Bender Operation Manual
Bending Capacity .............................Tubing from 1/2” OD - 3” OD
Maximum Capacity/Tube Thickness ....See Chart Below
Maximum Bending Radius ...............5”
Minimum Bending Radius ................3-1/2”
Swaging Capability* ..........................Expansion / Reduction / Forming
Swaging Capacity .............................1” O.D. Tubing - 3” O.D. Tubing
Motor.................................................5 H.P / Single or Three-Phase /
220-380-440 VAC
Pump Output ....................................3 GPM / 4200 psi (max. output)
Operation Modes ..............................Full Automatic or Manual Foot
Switch
Hydraulic Filter ..................................Canister type
Bending Force ..................................55,000 Pounds Maximum
Bend-Depth Control ..........................Degree Plate With Adjustable Pointer /
Automatic Stop and Return
Overall Length ..................................62” 1302-BAS
Overall Width ....................................30” 1302-BAS
Overall Height ...................................41”
* Special Radius Dies are available.
** Reduction Tools do not come standard
DESIGN FEATURES
MODELS 1302-BAS
Bending Capacity .............................Tubing from 1/2” OD - 3” OD
Maximum Capacity/Tube Thickness ....See Chart Below
Maximum Bending Radius ...............5”
Minimum Bending Radius ................3-1/2”
Swaging Capability* ..........................Expansion / Reduction / Forming
Swaging Capacity .............................1” O.D. Tubing - 3” O.D. Tubing
Motor.................................................5 H.P / Single or Three-Phase /
220-380-440 VAC
Pump Output ....................................3 GPM / 4200 psi (max. output)
Operation Modes ..............................Manual Control Valve
Hydraulic Filter ..................................Canister type
Bending Force ..................................55,000 Pounds Maximum
Bend-Depth Control ..........................Manual / No Automatic Stop
Overall Length ..................................68” 1302-BL
Overall Width ....................................30” 1302-BL
Overall Height ...................................41”
* Special Radius Dies are available.
** Reduction Tools do not come standard
DESIGN FEATURES
MODELS 1302BL (BLUE BULLET)
GAUGE / WALL DECIMAL
BENDER CAPACITY
THICKNESS EQUIVALENT
RADIUS MAXIMUM
SIZE BEND DEPTH
Bending Capacity .............................Tubing from 1/2” OD - 3” OD
Maximum Capacity/Tube Thickness ....See Chart Below
Maximum Bending Radius ...............5”
Minimum Bending Radius ................3-1/2”
Swaging Capability* ..........................Expansion / Reduction / Forming
Swaging Capacity .............................1” O.D. Tubing - 3” O.D. Tubing
Motor.................................................5 H.P / Single or Three-Phase /
220-380-440 VAC
Pump Output ....................................3 GPM / 4200 psi (max. output)
Operation Modes ..............................Full Automatic or Manual Foot
Switch
Hydraulic Filter ..................................Canister type
Bending Force ..................................55,000 Pounds Maximum
Bend-Depth Control ..........................Digital Readout
Automatic Stop and Return
Overall Length ..................................62” 1302-BA
Overall Width ....................................30” 1302-BA
Overall Height ...................................41”
* Special Radius Dies are available.
** Reduction Tools do not come standard
DESIGN FEATURES
MODELS 1302-BA
SPECIFICATIONS
4 .238 1”- 1-3/4 O.D. Tubing / Pipe
5 .220 1” - 7/8” O.D. Tubing / Pipe
6 .203 1” - 2” O.D. Tubing / Pipe
7 .180 1”- 2-1/8” O.D. Tubing / Pipe
8 .165 1”- 2-1/4” O.D. Tubing / Pipe
9 .148 1”- 2-1/4” O.D. Tubing / Pipe
10 .134 1”- 2-1/2” O.D. Tubing / Pipe
11 .120 1”- 2-1/2” O.D. Tubing / Pipe
12 .109 1”- 2-1/2” O.D. Tubing / Pipe
13 .095 1”- 3” O.D. Tubing / Pipe
14 .083 1”- 2-1/2” O.D. Tubing / Pipe
15 .072 1”- 2-1/2” O.D. Tubing / Pipe
16 .065 1”- 2-1/2” O.D. Tubing / Pipe
17 .058 1”- 2” O.D. Tubing / Pipe
18 .049 1”- 1-3/4” O.D. Tubing / Pipe
3-1/2”
135°
4” 145°
5” 172°
4” 150°
180° Style*
5”
180°
180° Style*
NOTE:
180° STYLE DIES ARE NOT
INCLUDED IN STANDARD
TOOLING PACKAGES.
Special size Dies not listed in this manual may be manufactured to your specifications.
Call factory for details. Special manufactured items require a 60-day minimum lead time.