BendPak BB 1302-BA, Operation And Service Manual

Page: 11 / 72

STANDARD SEGMENT SETS - These Segment Sets are
used to make Straight Expansions on Tubing ends and are
found in all standard tooling packages.
NOTE:
Keep Segment Sets and Arbor well greased.
The Arbor which is pulled through the center of the
Segment Sets is available in two sizes. The HSA-114 is an
Arbor used exclusively for 1-1/4” and 1-3/8” Tubing while
the HSA-112 is used for Tubing sizes 1-1/2” through 3”.
Bender Operation Manual 11
WARNING!
1. Always remove excess Tooling from Swaging area
before using Internal Expander.
2. To avoid breaking Tooling ALWAYS use proper
Segment Sets with appropriate Tubing size.
3. NEVER stand in front of Arbor when operating
Internal Expander.
HSA-112 Arbor HSA-114 Arbor