BendPak BB 1302-BA, Operation And Service Manual

Page: 5 / 72

3. Read and understand all safety warning procedures
before operating this machine.
4. Keep hands clear. Remove hands prior to bending,
forming, swaging or expanding Tubing. Avoid pinch
points.
5. Keep work area clean . Cluttered work areas invite
injuries.
6. Consider work area environment. Do not expose
equipment to rain. Do not use in damp or wet loca-
tions. Keep area well lighted.
7. Only trained operators should operate this machine.
All non-trained personnel should be kept away from
work area. Never let non-trained personnel come in
contact with, or operate machine.
8. Use Tooling correctly. Use all Tooling in the proper
manner. Never try to use a Tool for something that it
was not designed for. See manual for proper use.
9. Dress properly. Never wear loose gloves, clothing or
jewelry. They can be caught in moving parts. Non-
skid Steel - Toe Footwear is required when operating
machine. Wear protective hair covering to contain long
hair.
10. Always wear OSHA approved (publication 3151)
personal protective equipment at all times, when
installing, operating, maintaining or repairing the
Bender. Leather gloves, steel-toed work boots, eye
protection, back belts and hearing protection are
mandatory.
11. Do not overreach. Keep proper footing and balance
at all times.
12. Guard against electric shock. This machine must
be grounded while in use to protect the operator from
electric shock. Never connect the green power
cord wire to a live terminal.
14. Always unplug machine before servicing. Grasp
the Plug and then pull. Never yank the Power Cord
to disconnect it from the receptacle. Verify electri-
cal connections are good. Never use an Extension
Cord longer than
15 feet. If the Power Cord becomes
frayed, replace it. Never alter electrical components
on this machine. Never operate machine in or around
water or damp environments.
15. Warning! Risk of explosion. This equipment has
internal arcing or sparking parts which should not be
exposed to flammable vapors. This machine should
not be located in a recessed area or below floor level.
16. Maintain with care. Keep machine clean for better
and safe performance. Follow manual for proper
lubrication and maintenance instructions. Keep con-
trol handles and/or buttons dry, clean and free from
grease and oil.
17. Stay alert . Watch what you are doing. Use common
sense. Be aware.
18. Check for damaged parts. Check for alignment of
moving parts, breakage of parts or any condition that
may affect its operation. Do not use machine if any
component is broken or damaged.
19. Never remove electric Foot Switches from their
protective safety housing. Always remove foot from
pedal enclosure between bends.
20. Always allow for the “Safety Circle Of Swing”
around the Bender. There should be at least 10 feet
of space on both sides of the Bender so that the
Tubing will not come in contact with persons and/or
objects.
Bender Operation Manual 5
THESE SAFETY INSTRUCTIONS MUST BE GIVEN TO ALL OPERATORS TO READ.
IF THE INDIVIDUAL CANNOT READ, INSTRUCTIONS MUST BE READ TO THEM.
UPON DELIVERY
IMPORTANT SAFETY INSTRUCTIONS !
Read these safety instructions carefully and entirely!
1. Carefully remove the crating and packing materials.
2. Inspect the Bender for any signs of concealed ship-
ment damage or shortages. Remember to report any
shipping damage to the carrier and make a notation
on the delivery receipt.
13. Check the Voltage, Phase and Amperage
requirements for the Motor shown on the Motor Data
Plate.
Wiring should be performed by a Licensed,
Certified Electrician only.