BELL LABS INNOVATIONS Lucent Technologies MERLIN MAGIX, Installation, Spm, Maintenance, And Troubleshooting Supplement

Page: 255 / 280

Board Renumbering with the 016 MLX Module
8-77
System Programming Maintenance
10. Power up the system.
11. Perform a Board Renumber procedure:
Sys Program
( )
→
System
( )
→
Board Renum
( )
→
Yes
( ).
12. Print a new Extension Directory report. Verify that the extensions on the
new 016 MLX match those of the previous two 008 MLX modules.
13. Program the extensions and MFMs by using the Extension Information
reports printed in Step 7.
14. Program any Calling Group or coverage group membership, and any
buttons identified in Step 8.
15. If phantom modules were programmed, re-program the phantom modules,
as needed using the information in the Extension Information reports
printed in Step 3.
16. Back up the system to a new filename to keep the first backup intact. Use a
filename that describes the post-016 MLX configuration-for example, “post-
016 MLX.”
Replacing a 008 MLX Module with a
016 MLX Module
8
WARNING:
If you are replacing more than one 008 MLX module, repeat Steps 1-17
for each module. Do not try to replace more than one 008 MLX module at
a time, because the system programming will be corrupted and you will
need to completely reprogram the entire system manually to restore the
customer’s configuration.