SOFTS. [E444]
[E444]
Screens
Min
Max
Factory
Step
Unit
Navigation
WHEEL
– STOP.P - SOFTS.. [E444]
Soft stop at 0
– Automatic mode
Out
99
5
1
Wheel laps
[E444]
Soft stop at 0
– Manual mode
Out
99
Out
1
Wheel laps
[E444 P]
SOFTS
– Soft stop at 0 – Automatic mode [E444].
Close to the
Zeropoint
the motor speed is
gradually reduced in order not to lose catch. The setting defines how many revolutions the speed is
to be divided into. The calculation is from present
Motor mode
– Speed
(Jig, Catch, Haul up or
Line tangle speed) which is active, down to
Minimum speed [E154]
. The factory default value is 5
wheel laps.
This also makes the motor speed gradually increase if line is forced out, back to original speed
before it was reduced, or to
Minimum speed near Zeropoint
if line is stopped within the area for
Soft Stop At 0.
As a slow down area.
For example, if 5 laps are set and the present speed is 150rpm, and the
Minimum speed [E154]
is
set to 30 the speed is reduced according to the formula (150-30) / 5= 24rpm for each lap the last 5
laps.
Soft stop at 0
– Manual mode [E444P]
gives similar motor speed reduction from
Speed at
–
Manual speed [E14]
to
Minimum speed [E154]
when using
[U]
p button in manual control.
Table shows units and value limits. See
[E654]
for menu detail level setting. Some screens are not visible if simple view, or normal view are Chosen .
Menu [E44]
Navigate [E4]
Main screen
