[E613]
– [E614] – [E615]
BIG [E613] - SHOWTIME [E614] - HELP[E615]
SHOWTIME [E614]
Pressing the
[1-6]
buttons under the
Main screen
display shows the
DRAG
,
CATCH
or
BRAKE
values this time, then returns to
Main screen.
HELP
– Help text delay [E615]
Brings small (font size) help texts to screens if activated. Help texts
pops up after pressing the button in almost every screen when the delay time has passed. Pressing the
buttons
[1-6]
hides the text for another period. If the text is not desired, set time to "Out“.
Show wheel status [E615 P]
can be activated to briefly display different information in
Main Screen
(see Status Field on page Machine
– 1, Figure 2) for a different status of
Catch mode
and
Wheel
. This
can be helpful if you have trouble understanding why or which brake that’s active or why the machine
gets into
Catch mode
, or not into
Catch mode
when it should. The following can be displayed.
• “
W
" Appears when values are saved to the memory. This symbol can not be disabled and displayed
while writing to memory. Do not turn off the machine while it is displayed.
• “
+
" Indicates that the
Weight
has passed the
CATCH
value which starts
Catch detection
. See
Machine - 4
High load
for more information.
• “
–
" Appears if the motor current is less then with only hook and sinker. See Machine
– 4
Low load
for mode information.
• “
S
" Appears if
Speed brake
is activated (braking the wheel).
• “
D
" Appears if
Depth brake
is activated (braking the wheel).
• “
A
" Appears if
Air brake
is activated (braking the wheel).
100%
50%
Figure 1. Font sizes for
Linte out.
Screens
Min
Max
Factory
Step
Unit
Navigation
MORE
– DISP – DISP – BIG [E613]
BIG
– Font size
Out (8mm) / 50% (17mm) / 100% (32mm)
[E613]
BIG
– Time before showing
Out
99,9
Out
0,1
Seconds
[E613 P]
MORE
– DISP – SHOW [E614]
SHOW
– Showtime
0,5
20,0
4,0
0,1
Seconds
[E614]
MORE
– DISP – HELP [E615]
HELP
– Help text
Out
10,0
Out
0,1
Seconds
[E615]
HELP
– Show wheel status
Out
IN
Out
[E615 P]
BIG [E613] Line out
can be displayed with bigger font size after a time after
[A]
uto button is pressed.
Table shows units and value limits. See
[E654]
for menu detail level setting. Some screens are not visible if simple view, or normal view are Chosen .
Configuration [E63
] There are 3 font sizes that
Line out
can be
displayed with.
• “
100%
” shows 32mm large numbers, ie over the entire display height.
The display has no room for other information in this mode.
• “
50%
” shows 17mm high (half display height) which can
simultaneously display up to two optional values (see previous page)
and the Auto Symbol. Pause before showing
• “
Disabled
”. Original 25% is used all the time. No change is made.
Pause before showing [E613 P]
. The time counted down from when button is press before viewing.
Main screen
Navigate
[E6]
Menu
[E61]
