ZERO - Stop At 0 [E441]
or (
Stop at Zeropoint
) This function determines if the motor shall stop when
Zeropoint
is reached, which is common. Alternatively to
Stop At 0 [E441]
is
Stop At Pulley [E443]
(se
below.
Stop At 0 [E441]
and
Stop at Pulley[E443]
can be used individually or cooperate.
Stop At Sea
– Time [E442]
is the Maximum run time on the motor if the wheel stops, for example at
bottom or when line is at top. This time can be set up to 99.9 seconds, but not removed. As long as the
wheel is turning the time is retrigged.
Stop At Pulley
– Time [E443]
is exactly as above
Stop At Sea
– Time [E442].
However this is mentioned
to be used closer to the
Zeropoint
and is useful if the line is stretched a lot during fishing, making the
calculated
Zeropoint
different to the real one. A device is then attached to Fishing line corresponding to
the
Zeropoint.
The device can not pass through the Pulley, which stops the wheel and counting down the
time. When time runs out the motor is stopped. Maximum time will show as “OFF” and turns the
Stop At
Pulley
feature off.
Stop At Pulley
– Above depth [E443 P]
decides above which depth
Stop at Pulley
is active within.
Below this depth, the
Stop at Sea
takes over.
Stop At Pulley
– Restart [E44 3PP]
is a timer that restarts the
Fishing program
after
Stop At Pulley
has
occurred. Similar to what
CATCH
– Restart [E3P PPP P]
does in
Catch mode
and it’s same as pressing
[A]
uto button. Useful if catch is automatically released from the hooks, and ready for start.
Stop At Pulley
– Autoreset [E443PPP]
an extra feature when using
Stop At Pulley
– Restart [E44 3PP].
This will automatically clear the
Line out
when
Stop At Pulley
occurs, every time it comes up. As pressing
[Z]
ero button.
NULL [E441] - SEA [E442] - PULLEY [E443]
[E441]
– [E442] – [E443]
Screen
Min
Max
Factory
Step
Unit
Navigation
WHEEL - STOP.P - NULL [E441]
NULL - Stop at 0
Out
IN
IN
-
-
[E441]
WHEEL - STOP.P - SEA [E442]
SEA
– Time
1,0
99,9
30,0
0,1
Second
[E442]
WHEEL - STOP.P - PULLEY [E443]
STOP AT PULLEY - Time
Out
99,9
Out
0,1
Second
[E443]
STOP AT PULLEY - Above depth
1
50
20
1
M/Fm/Ft
[E443P]
STOP AT PULLEY
– restart
0,1
60
Out
0,1
Second
[E443PP]
STOP AT PULLEY - Auto 0
Out
IN
Out
-
-
[E443PPP]
Menu [E44]
Table shows units and value limits. See
[E654]
for menu detail level setting. Some screens are not visible if simple view, or normal view are Chosen .
Navigate [E4]
Main screen
