Communication - 2
Line out. Note, when
”-” is showed
the font size is reduced to fit.
Excample shows machine
with address 3 i group 1.
Fishing mode
A
utomatic
Fishing mode.
Automatic.
F
ish caught
(Flashes)
Manual mode
(Empty sign)
ARROW DOWN. Motor
stopped. BRAKE force
on wheel
ARROW UP. Motor runs.
DRAG force on wheel.
EMPTY SIGN. Motor
stopped. DRAG force on
wheel.
Motor and wheel status
Group screen
Dashes.
Machine is not responding to communication. Possible reasons.
• Error in communication. Temporary stops may occur but
communication will automatically restart.
• Collision. Two or more machines have the same address setting, while
they are in the same group. Change address or move machine to
another group.
• Machine turned off.
• Machine is addressed into a group that master does not call.
• Machine is deactivated (set to OFF) in setup, in the master. See page
Communication-1 Chapter "Enable / Disable Network Machines" for
changes.
No answer
Information in GROUP screens.
Information as
Line out
,
Fishing mode, Wheel
and
Motor
status is shown as described below.
GROUP A
1
2
3
4
5
6
Address position in
GROUP screens
COMMUNICATION
