5
Kaleido-X
Release Notes
New Features in Kaleido-X Version 6.30
•
[Ref. F33234/#33281]
Kaleido-IP:
Support for source-specific multicast (SSM), and source-
filtered multicast (SFM) transport streams (filtering limited to a single source IP in
include mode only).
•
[Ref. #30130]
Grass Valley Zodiak switchers:
Support for the serial contribution tally
protocol used to obtain tally information from Grass Valley Zodiak switchers.
Enhancements in Kaleido-X Version 6.30
•
[Ref. #31712]
Kaleido-IP:
Decoding of unencrypted Digicipher 2 (DCII) elementary
streams.
•
[Ref. #32052]
Kaleido-IP:
Support for dynamic H.264 video format changes.
•
[Ref. #34104/34070]
Kaleido-IP:
Improved handling and recovery of dynamic PSI table
changes in transport streams.
•
[Ref. #32455]
Kaleido-IP:
Text items (e.g., program and provider names) within DVB
streams are now decoded using the character set specified in the associated DVB-SI
data (as per ETSI EN 300 468 Annex A).
•
[Ref. F33678]
Kaleido-IP:
Improved fluidity when decoding streams at progressive scan
frame rates of 60 or 50 Hz. Better deinterlacing quality for interlaced video content.
•
[Ref. F33953]
Kaleido-IP:
Support for the display rotation option.
•
[Ref. #31228/32924]
Virtual alarms:
The internal representation of virtual alarms has been
made more generic resulting in better portability of multi-viewer system databases,
and clearer identification of alarms shared with iControl systems.
Notes
• When navigating to these video or audio alarms in a Kaleido-IP System list
or in an alarm browser, alarms associated with streams that are currently
not shown on the monitor wall appear with a white status indicator,
meaning that the alarm’s status is
pending.
• Implementing a cycling or touring configuration requires iControl.
Note:
With the current version of the Kaleido-X software, it may take up to
1.5 s for the video decoding to resync during which time the video appears
frozen on the monitor wall.
Notes
• If two displays are connected to the Kaleido-IP, then they must both have
the same orientation.
• With the current version of the Kaleido-X software for the Kaleido-IP, the
display rotation option cannot yet be enabled or verified in XAdmin’s
Status and Options page. Contact your Miranda sales representative for
more information.
