35
Kaleido-X
Release Notes
•
[Ref. #35347]
Import NVISION config:
On rare occasions, when configuring physical
routers in XEdit’s
Router configurations
tab, the
Import NVISION config
button is not
available.
Workaround:
Disconnect XEdit from the multi-viewer, and then connect again.
•
[Ref. #34963/33780]
Kaleido-IP:
After changing the name of a transport stream, related
alarm indicators in the System list may turn white (meaning that their status is pending
or unknown).
Workaround:
Restore the transport stream’s original name.
•
[Ref. #34177]
Kaleido-IP:
After adding a transport stream to your Kaleido-IP system
configuration, it may happen that the transport stream that appears at the bottom of
the filtered System list associated with the sources table cannot be expanded.
Workaround:
Click a different cell in the sources table, or collapse the filtered System list
and then expand it again.
•
[Ref. #33200]
Kaleido-IP source names:
If your sources table includes dynamic
assignments from Kaleido-IP transport streams in the
Name
level under
Source info
,
using the incremental copy tool to quickly populate the source name column for a
range of logical sources results in clearing assignments in this column instead.
•
[Ref. #33499]
Monitor wall destinations:
After switching to the
Layouts
tab in XEdit, the
set of destinations listed in the
Monitor wall destinations
pane may momentarily not
belong to the current system’s KX Router, or fail to reflect the latest changes to this
logical router’s destinations. This is more noticeable if you work with different systems
during the same XEdit session, if you modify your KX Router configuration while
managing a specific layout’s assignments, or if you wish to assign monitor wall
destinations to monitors in a
full screen
layout when a room layout has yet to be
opened.
Workaround:
Open a
room
layout to update the set of destinations listed in the
Monitor
wall destinations
pane.
•
[Ref. #33001]
Source assignments:
When assigning logical sources or monitor wall
destinations to monitors in a layout, it may happen that the selection migrates to an
adjacent element from the
Channels/Sources
or
Monitor wall destinations
list during
the drag-and-drop operation.
Workaround:
Once you selected a logical source or monitor wall destination from the
corresponding list, dragging the selected element horizontally until the pointer exits
the
Tools
pane, or performing a slower drag-and-drop may help.
•
[Ref. #31307]
Kaleido-IP:
In the case of transport streams for which
Activate automatic
sources creation
was selected, new logical sources created automatically for these
streams may not follow the current template.
•
[Ref. #30282]
Kaleido-IP:
In the logical sources table, if you manually remove sources
associated with a transport stream for which
Activate automatic sources creation
was
selected, these sources are not automatically created again.
Workaround:
Right-click the appropriate transport stream element in the filtered System
list associated with the sources table, and then click
Create logical sources
.
•
[Ref. #30884]
Kaleido-IP:
On rare occasions, when navigating the System list in XEdit, the
first time you expand an elementary stream, an audio or video presence alarm may
briefly indicate a signal loss before turning green.
•
[Ref. #26408]
TSL (network) devices port number:
XEdit does not prevent adding
multiple TSL (network) devices configured to the same Kaleido-X port number (8901 by
