6 Starting operation
6.4 Configuration of the LioN-P
PROFINET I/O modules in STEP 7
Replacement of the an IO-Link device of the same type
is thus only possible if the serial number is changed in
the Engineering Tool at the same time.
VendorID
The VendorID of the IO-link device used can be entered
as a decimal value in the
VendorID 1
(high-order byte)
and
VendorID 2
(loworder byte) fields.
DeviceID
The DeviceID of the IO-link device used can be entered
as a decimal value in the
DeviceID 1
(high-order byte)
and
DeviceID 3
(low-order byte) fields.
Serial Number
The serial number of the IO-link device can be entered
as a string in the
Serial Number
input field. The input
is limited to 16 characters.
Fail Safe Configuration (for outputs only)
This option is only applicable for IO-Link channels in COM mode where output
data are used. In COM mode, the IO data are exchanged between the IO-
Link master and IO-Link device via serial communication.
Fail Safe Value (COM-Mode)
The following values are selectable:
Figure 16: Fail Safe Configuration
Set Low
All bits of the output data with a value of
0
are
transmitted to the IO-Link device. (Default setting)
Set High
Manual LioN-P PROFINET IO-Link Master
Version 2.1 10/2017
43
