7 Bit assignment
7.1 Process data Status and Control
module, slot 1/sub-slot 1
Bit
7
6
5
4
3
2
1
0
Port
-
-
-
-
-
-
-
-
Pin
-
-
-
-
-
-
-
-
Channel
-
-
-
-
-
-
-
-
Table 36: Byte 3, reserved
Key:
D
The data in the cells highlighted in blue are only available for LioN-P 60
devices.
D
Byte 0 (
Pin 4, C/Q mode
): The digital output on the corresponding port can
be controlled via the process data. The I/O link port must be configured
in digital output mode.
D
Byte 2 (
COM mode
) can be used to temporarily (as long as the
corresponding COM control bit is set) switch one or more IO-link ports
previously in digital input (DI) operating mode to IO-Link operating mode.
As a result, it is possible to establish communication with the connected
IO-Link device for parameterization. No process data are exchanged
during this time.
Manual LioN-P PROFINET IO-Link Master
Version 2.1 10/2017
75
