7 Bit assignment
7.1 Process data Status and Control
module, slot 1/sub-slot 1
7 Bit assignment
The LioN-P PROFINET IO-Link masters use a modular device model. Slot 1
subslot 1 contains the IO-Link master status and control module. This module
always has 4 bytes of input data and 4 bytes of output data; it is always
statically configured on selecting a LioN-P IO-Link Master from the GSD file.
The IO-Link ports use the following sub-slots 2 through 9 of slot 1; they
can have a different operating mode and data length depending on the
configuration.
7.1 Process data Status and Control module,
slot 1/sub-slot 1
7.1.1 Digital IO mapping mode 1 (default mapping)
If mapping mode 1 was selected in the device configuration, the data of the
Status and Control module are transferred as follows.
Input data of the Status/Control modules
Bit
7
6
5
4
3
2
1
0
Port
X4
X4
X3
X3
X2
X2
X1
X1
Pin
2
4
2
4
2
4
2
4
Channel
4
4
3
3
2
2
1
1
Table 17: Byte 0, Digital Input Status
Bit
7
6
5
4
3
2
1
0
Port
X8
X8
X7
X7
X6
X6
X5
X5
Pin
2
4
2
4
2
4
2
4
Channel
8
8
7
7
6
6
5
5
Table 18: Byte 1, Digital Input Status
Manual LioN-P PROFINET IO-Link Master
Version 2.1 10/2017
67
