61
IQH3B/IQH3BQ
User Manual
Type
This displays the unique identifier of the module fitted in the slot. See
for more information.
The following controls are provided:
•
Bound Type ID:
This allows the slot to be associated with a particular type of module, for
example an encoder type 284. If a module matching this type ID is fitted, the Gateway will
use the user-specified name. If an incorrect card type is installed in the slot, the RollCall ID
will not be correct and the actual card type will be displayed in the module browser. The
names and types may be set up before the installation of the modules. Edit the
Bound
Type ID
after updating the
Editable Name
.
To enter/modify the
Bound Type ID
, type a new number in the editable field and click
Save
(
S
). To return to the default number, click
Preset
(
P
).
•
Installed Unit ID:
This displays the identifier of the module fitted in the slot position.
Non-RollCall
This allows a non-RollCall card inhabiting slot to be identified. See
for more information
.
Passive units can be given a name, indicating to RollMap that a card exists.
•
Enable:
Select this option to indicate that a non-RollCall card is in the slot. When this
option is selected, the installed unit type of the passive card appears as
NOT RollCall 3!
,
and the installed unit ID appears as
65535
.
•
IDNAME:
This field allows an
IDNAME
log field to be associated with logs from a non-
RollCall card. To enter/modify the
Non RollCall ID
name, type a new name in the editable
field and click
Save
(
S
). To return to the default name, click
Preset
(
P
).
Note:
If there is a RollCall-responsive card in the slot, selecting this
option will have no effect.
Bound Type ID
Installed Unit ID
Preset
Save
Enable
ID Name
Preset
Save
Summary of Contents for grass valley IQH3B Series
