GUIDE TO INSTALLATION AND OPERATION
HCO-3901 |
35
•
Remote System Administration – opens the Joining Locators data box,
which lists remote lookup services to which this HCO-3901 is registered.
Add:
Force the iControl service for this HCO-3901 to register itself on
a user-specified Jini lookup service, using the following syntax:
jini://<ip_address>
where <ip_address> is the ip address of the server running the
lookup service
Enter the address in the Input data box. e.g.
Remove:
select one of the services listed in the window by clicking on it, and click
Remove
and then
Yes
to
delete it from the window.
3.4.16 User Presets
The User Preset controls allow the user to save and
recover all configuration settings on the card.
Select any one of the five presets using the pulldown list.
The name of the currently-selected User Preset is shown
on the on the pulldown icon (e.g.
User1
,
User2
,…
User5
)
•
Click
Load
to load the contents of the selected
User Preset into the HCO-3901. All parameter
settings and values will be replaced by the
contents of the selected User Preset.
•
Click
Save
to store the current parameter settings
and values from the HCO-3901 into the selected
User Preset. The existing contents of the preset
will be overwritten.
Figure 3.43 User Presets
Figure 3.42 Joining Locators window
