GUIDE TO INSTALLATION AND OPERATION
30
| HCO-3901
•
Reclocked outputs.
7. If there are no errors on input 1 but a reference mismatch is detected on input 2, the CSO keeps working.
The Options panel gives some information about obtaining
the Clean Switch option, and provides a data entry box
“Enter Key” where the activation key supplied when the
option is purchased can be entered.
•
Enter the Key in the data box, and click the
Enable
Option
button to activate the Clean Switch feature.
ALC –
This option enables the Automatic Loudness Control feature of the HCO-3901.
Note that this option is available for 2, 6, 8 or 16 channels.
A separate license key is required for each of these, and the
data window below the
Enter key
data box will indicate
which is currently enabled, e.g.:
HCO-3901-OPT-ALC-8
for the 8 channel option
If the currently-enabled option is 2, 6, or 8 channels, the
Enter key
data box will be available to upgrade to a greater
number of channels.
Figure 3.34 Options panel – ALC option
Figure 3.33 Options Panel – Clean Switch Option
