Belanger Signature Series, Owner'S Manual

Page: 9 / 94

INTEGRA® / E-1063
1-1
Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
1MANUL102
Chapter 1 Introduction
Operational Warning
Formulations containing the chemicals listed below are particularly dangerous and should not be used
even at low concentrations:
•
Hydrofluoric Acid
•
Ammonium Bi-fluoride
•
Bromic Acid
•
Muriatic Acid
•
Sulfonic Acid
•
Phosphoric Acid
•
Hydrogen Cyanide
•
Hydrochloric Acid
•
Chlorinated Solvents
Belanger, Inc. does not endorse or condone the use of chemicals that are potentially dangerous to human
health, the environment or property. Belanger recognizes that it is the right and sole decision of the end
user operators of our equipment as to the type and dilution ratio of the chemicals used in their facilities.
We strongly recommend that the end user does not select products containing any of the chemicals listed
above as an ingredient in the wash solutions. The chemicals listed above are potentially dangerous to
human health, and have a detrimental, deteriorating effect on the equipment and the facility. Be advised
that a portion of, or all of your warranty will be voided if you determine to use any of the chemicals
listed above as an ingredient in the wash solutions in conjunction with your Belanger automatic car wash
equipment:
Limitation (4), of Paragraph (8), Limited Warranty, of the Belanger Terms and Conditions of Sales
describes the potential limitation of warranty due to your chemical selection:
(4) This warranty shall be void for all equipment failures and premature component wear caused by
the use of corrosive chemicals in the wash process. The following list includes some, but not all, of
the particularly corrosive chemicals that if used in conjunction with Belanger equipment will void the
warranty: Hydrofluoric Acid, Ammonium Bi-fluoride, Bromic Acid, Muriatic Acid, Sulfonic Acid,
Phosphoric Acid, Hydrogen Cyanide, Hydrochloric Acid, and Chlorinated Solvents. The Purchaser
also agrees to accept the responsibility and liability for the selection and use of any chemicals listed
above; however, should the end user decide to use formulations containing any of the above
ingredients, the end user should institute a comprehensive training program and implement detailed
operational parameters within their organization for the proper handling and treatment of such
products to minimize the potential dangers involved. Consult your chemical supplier for assistance in
establishing operational guidelines in the use of their products. MSDS (Material Safety Data Sheet)
should be obtained from the chemical supplier before using any chemical formulation.