manualshive.com logo in svg

Belanger Signature Series, Owner'S Manual

Share
Download
Belanger Signature Series Owner'S Manual Download Page 39

INTEGRA® / E-1063                                       

 

1MANUL102

                    

Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681                     

4-11

 

Chapter 4 Operator Interface/Standard Wash Operation Screens 

User 

User / Power Up Choice 

 

Note:

 

If MAIN screen displays “Make Power Up Choice”, the user MUST come to this screen to 

ACCEPT before wash will continue. See SETUP/MISC to disable this option. Option can 
NOT be disabled for E-Stop. 

User / Monitor Inputs 

 

User / Monitor Outputs 

 

Screen Key:

•

 

This screen is to monitor wash status after a Power 
Up or E-Stop. 

•

 

The user can accept the current status or make 
changes from this screen. 

 

Screen Key:

•

 

This screen allows monitoring of Input status. The 
ovals are filled when the Input is ON. Check prints 
for description of Input behavior. 

. 

 

Screen Key:

•

 

This screen allows monitoring of Output status. The 
ovals are filled when the Output is ON. 

 

Summary of Contents for Signature Series































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands