manualshive.com logo in svg

Belanger Signature Series, Owner'S Manual

Share
Download
Belanger Signature Series Owner'S Manual Download Page 55

INTEGRA® / E-1063                                       

 

1MANUL102

 

                    

Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681                    

5-9

 

Chapter 5 Operator Interface/Wash Setup Screens 

Setup 

Setup / Loading 

Loading is the process of placing a vehicle on the Conveyor and getting it moving through the Photo-Eyes with 
proper Dollies. There are 2 Loading screens. They are covered below and on the following 2 pages. 

Loading Setup 1 (first screen) 

Pressing the LOADING key will take you to the following screen.

 

 

•

 

Dollie Up Count: This function toggles back and forth between “Count” and “Inches”. This determines 
whether the “Dollie UP” fork stays up according to Dollie Travel Distance or by Dollie Counts. Count is 
recommended, count requires a dollie cont switch. If switched to inches, the AUTO FRONT/BACK inches 
must be set to achieve desired Dollies. If you are experiencing trouble with the Dollie count input or your 
system does not have Dollie count, change it to INCHES and set distance accordingly. 

•

 

Front Auto Dollie: This function toggles back and forth between “ON” and “OFF”. When set to “ON”, Dollie 
will automatically be called up when a front tire passes over the Treadle. It must be OFF for Rear Push. 

FRONT AUTO DOLLIE must be ON before any Front Auto Dollie functions will activate. 

•

 

Rear Auto Dollie: This function toggles back and forth between “ON” and “OFF”. When “ON”, Dollie will 
automatically be called up when the rear tire is over the Treadle. This function is on in most systems. REAR 

AUTO DOLLIE must be ON before any Rear Auto Dollie functions will activate. 

•

 

Auto Front Dollies / Inches: This function determines the two following items. 

•

 

If Dollie Up is set to COUNT, this displays the number of Dollies that will pop up behind the front tire 
when the output is activated. FRONT AUTO DOLLIE must be ON.  

•

 

If Dollie Up is set to INCHES (Not Recommended), this displays the number of inches the Dollie Up fork 
will remain up. (Generally set at Dollie spacing times the number of Dollies desired). 

•

 

Auto Back Dollies / Inches: This function determines the two following items. 

•

 

If Dollie Up is set to COUNT, this displays the number of Dollies that will pop up behind the rear tire. 
REAR AUTO DOLLIE must be ON.  

•

 

If Dollie Up is set to INCHES (Not Recommended), this displays the number of inches the Dollie Up fork 
will remain up. (Generally set at Dollie spacing times the number of Dollies desired).  

•

 

Dollie Call Dollies / Inches: This function determines the two following items. 

•

 

If Dollie Up is set to COUNT, this displays the number of Dollies that will pop up when the Dollie Call 
button is pressed. 

•

 

If Dollie Up is set to INCHES (Not Recommended), once a Dollie-Up Fork pops up, this displays the 
number of inches the Dollie Up fork will remain up after Dollie Call button is pressed.  

 

Summary of Contents for Signature Series































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands