manualshive.com logo in svg

Belanger Signature Series, Owner'S Manual

Share
Download
Belanger Signature Series Owner'S Manual Download Page 37

INTEGRA® / E-1063                                       

 

1MANUL102

                    

Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681                     

4-9

 

Chapter 4 Operator Interface/Standard Wash Operation Screens 

User 

User / Input Bypass 

 

User / Input Bypass / Enter Photo - Edit 

 

 

Screen Key:

•

 

This screen is for temporarily bypassing the 
corresponding Input that may be causing issues. 

•

 

Pressing the ENABLE button will change behavior to 
bypass the corresponding Input. This means it will 
run in the BYPASS manor as setup by pressing the 
EDIT key. 

Screen Key:

•

 

NORMAL: This is the data entered into the 
Loading Setup screen and will be utilized for 
normal operation. 

•

 

BYPASS: This is the data entered into this 
screen and will be utilized when ENTER 
PHOTO BYPASS is active. 

Summary of Contents for Signature Series































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands