manualshive.com logo in svg

Belanger Signature Series, Owner'S Manual

Share
Download
Belanger Signature Series Owner'S Manual Download Page 41

INTEGRA® / E-1063                                       

 

1MANUL102

                    

Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681                     

4-13

 

Chapter 4 Operator Interface/Standard Wash Operation Screens 

User 

User / Print 

User / Print / Options 

 

User / About 

 

Faults  

 

Screen Key:

•

 

Pressing these buttons will print the corresponding 
setup. 

 

Screen Key:

•

 

This screen displays the software version for 
both the HMI screen and the Logic in the 
controller. 

•

 

This screen also displays the accumulated 
total of vehicles washed by the controller. 

 

Screen Key:

•

 

The ovals to the left will fill in solid when the 
Fault is active. 

•

 

The Fault Code is the number that will be sent 
to a pager to represent the current Fault 
status. 

 

Summary of Contents for Signature Series































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands