manualshive.com logo in svg

Beko METPOINT BDL compact, Installation And Operating Manual, Page: 112 / 118

Share
Download
Beko METPOINT BDL compact Installation And Operating Manual Download Page 112

Installation and operating manual 

EN 

112 METPOINT

®

 BDL compact

12.  SD card and batteries

To store measurements for subsequent processing, the METPOINT

®

 BDL compact features a SD card slot.

An integrated battery (button cell) ensures that the configuration data is not lost when the device is shut down.

DANGER

Battery and SD card 

The battery and the SD card must be changed by authorised skilled technical personnel of BEKO. 
Before changing the battery or SD card, ensure that the device is de-energised.

Danger!

Risk of damage from ESD

The device contains electronic components that might be damaged or even destroyed by 
electrostatic discharge (ESD).

Preventive measures

For maintenance and service work that requires you to open the housing of the device, observe the instructions in chapter 
„8.1.1. Prevention of electrostatic discharge (ESD)“ to prevent damage from electrostatic discharge.

Summary of Contents for METPOINT BDL compact























































































































Reviews:

No comments