manualshive.com logo in svg

Beko METPOINT BDL compact, Installation And Operating Manual, Page: 105 / 118

Share
Download
Beko METPOINT BDL compact Installation And Operating Manual Download Page 105

EN  

Installation and operating manual

METPOINT

®

 BDL compact 

105

For each channel a value can be selected for display 
in the 

Chart

.

Here: channel A1 has been selected. For each 
channel, select a value for visualisation in the 

Chart

 

, and one value to be displayed In addition, you can 

define a 

Colour

 and the y-axis scaling factors (

min, 

max, Raster

) in 

Home 

 

Chart 

.

Home 

 Chart

/Real time values

Channel A1:

In the example, the flow volume has been selected 

for the 

Chart

.

If more than one channel has been selected, all 
related charts are displayed. Please note that only 
the y-axis of the selected channel is displayed.
When no y-axis scaling is entered in the setup, 

min. 

is set to 0, 

max.

 is set to 100, and 

grid

 is set to 10.

Proceed as described above to configure all other setups!

Summary of Contents for METPOINT BDL compact























































































































Reviews:

No comments