manualshive.com logo in svg

Beko METPOINT BDL compact, Installation And Operating Manual, Page: 70 / 118

Share
Download
Beko METPOINT BDL compact Installation And Operating Manual Download Page 70

Installation and operating manual 

EN 

70 METPOINT

®

 BDL compact

11.2.3.5.  Relay settings

Home 

 Settings

 Device settings

 Relay settings

If the 

Relay

 buttons are activated, you have the 

option to permit relay reset upon an alarm.

The relevant settings must be made in the password-
protected 

Device settings

 menu.

In the event of an alarm (e.g. alarm 1 (yellow), 
channel A1), a message is displayed.

If you have permitted relay reset in the 

Relay 

settings

, you can reset the relay by pressing the 

Relay 1

 button.

Press the 

OK

 button to close the message box.

11.2.3.6.  SD card 

Home 

 Settings

 Device settings

 SD card 

 Reset Logger database

Home 

 Settings

 Device settings

 SD card 

 Erase SD card

To lock the currently stored data for use by the BDL 
compact, press the Reset logger database button. The 
data remains stored on the SD card and is thus available 
for external use.

To delete all data from the SD card, press the Erase SD 
card button.

Summary of Contents for METPOINT BDL compact























































































































Reviews:

No comments