Installation and operating manual
EN
6 METPOINT
®
BDL compact
1.3. General safety instructions
NOTICE
Before reading this manual, make sure that it refers to your device model.
Before reading this manual, make sure that it refers to your device model. Strictly observe all
instructions provided in this operating manual. It provides general information and instructions
for the installation, operation and maintenance of your device. Therefore, it is important that the
installation technicians and all operators / *specialist technical personnel read these instructions
prior to installation, start-up and maintenance. A copy of this installation and operating manual
must be kept near the METPOINT
®
BDL compact where it is at all times accessible to staff. In
addition to this installation and operating manual, observe all applicable local and statutory
regulations. Ensure that the METPOINT
®
BDL compact is only operated within the permissible
limits as specified on the type plate. Non-compliance might result in injury or damage to property,
malfunction or device failure.
If you have any queries regarding the content of this installation and operating manual, please
contact BEKO TECHNOLOGIES.
WARNING!
Risk of injury to personnel with insufficient qualification!
Incorrect operation of the device might cause serious injury or damage to property. All tasks
described in this operating manual must be performed by skilled technical personnel who meet the
criteria outlined below.
CAUTION!
Malfunction of BDL compact
Incorrect installation or insufficient maintenance can result in malfunction of the BDL, so that the
incorrect values are displayed.
DANGER!
Inadmissible operating parameters!
If the specified limits are exceeded, there is a risk of device malfunction, potentially resulting in
injury and/or damage to property.
Actions:
• Ensure that the METPOINT
®
BDL compact is only operated within the permissible limits as specified on the type plate.
• Strictly comply with the performance data of the METPOINT
®
BDL compact permissible for your application.
•
Always adhere to the specified transport and storage temperatures.
Additional safety instructions:
• For the installation and operation of the device, always comply with the statutory safety regulations.
• Do not operate the BDL in potentially explosive atmospheres.
Additional instructions:
• Prevent overheating of the device!
*
Skilled technical personnel
Skilled technical personnel are persons who, due to their professional qualification and knowledge in the field of measuring,
control and pneumatic technology, and their knowledge of the applicable statutory regulations, guidelines and standards
are in a position to foresee potential dangers in relation to the use of the device and who are qualified to perform the tasks
described in this manual.
Special operating conditions (e.g. aggressive media) require additional knowledge.