Installation and operating manual
EN
16 METPOINT
®
BDL compact
8.1.1. Prevention of electrostatic discharge (ESD)
DANGER!
Risk of damage from ESD
The device contains electronic components that might be destroyed by electrostatic discharge
(ESD). Avoid contact with persons or objects that are electrically charged. In the worst case,
components sensitive to ESD might be instantly destroyed when touched or fail after start-up.
In order to minimise or prevent possible damage from sudden electrostatic discharge, observe the
requirements of EN 61340-5-1. Do not touch electronic components while they are powered.
Basic safety precautions
In order not to cause damage when handling electronic devices, take the necessary precautions for the prevention of
electrostatic charges laid down in DIN EN 61340-5-1, IEC 63140-5, and DIN EN 100 015.
These precautions prevent electronic discharge and thus protect your equipment.
Preventive measures
When opening the housing of the METPOINT
®
BDL compact for maintenance or servicing, take the following protective
measures:
• Stand on an earthed ESD mat
• Wear a wrist strap
• Discharge tools prior to use by rubbing them over the ESD mat
FOR ELECTROSTATIC
UNLOADING DANGEROUS
CONSTRUCTION COMPONENTS