Beko CLEARPOINT M010 Installation & Operation Instructions Download

Page: 6 / 56

1.4.2 On the device

Symbol/pictogram

Description/explanation

General hazard symbol (danger, warning, caution)

(This symbol is indicated on the type plate and maintenance sticker)

Observe the installation and operating manual

(This symbol is only indicated on the type plate)

Maintenance sticker

This sticker contains a stylized illustration indicating that the user manual must be read

before completing maintenance work and that the product must be depressurized before

maintenance work.

Flow

Stamp water separator insert

(This stamp is on the base of the water separator insert and indicates the direction of flow.

CLEARPOINT

Water separator

Installation and operation instructions

6 | 56

Summary of Contents for CLEARPOINT M010

























































Search results

Summary of Contents for CLEARPOINT M010

Reviews:

Related manuals for CLEARPOINT M010

Brands by name

Popular brands

Beko CLEARPOINT M010, Installation & Operation Instructions

Search results

Summary of Contents for CLEARPOINT M010

Reviews:

Related manuals for CLEARPOINT M010

Brands by name

Popular brands