Beko CLEARPOINT M010, Installation & Operation Instructions

Page: 31 / 56

9.2.2 Cleaning work
The following requirements must be fulfilled to carry out cleaning work and preparatory work must be completed.
Preconditions
Tool Material Protective equipment
• none • Mild cleaning agent
• Cotton or disposable cloth
• Protective gloves (liquid-
resistant)
• Safety glasses with side
protection (goggles)
• Hearing protection
• Class FFP 3 respirator
• Safety shoes
To clean the separator, use a damp (but not wet) cotton cloth or disposable tissue and a mild conventional detergent or
soap.
1. Spray the cleaning agent on a new cotton or disposable cloth
2. Rub over the entire component
3. Then dry the device with a clean cloth or let it dry at room temperature.
9.3 Visual inspection
A visual inspection of the separator must be completed to check all components for mechanical damage and corrosion.
Damaged components must be exchanged promptly.
Installation and operation instructions CLEARPOINT
®
Water separator
31 | 56